%%EOF
Once one lever is in, insert a second lever and push the tire over the rim - it should come off. Then when you knock it out, use a pin punch and strike the bearing extractor. WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. Many wheelchair users and their families struggle with wheelchair tires leaving dirt, marks, scuffs and scratches on floors and carpets. Be sure to wear gloves and eye protection while working with dangerous solvents like mineral spirits, and always ventilate the area when working with a chemical. Yes! Then do the same for the other bead going in under both tire beads from the same side. Each of these options has its own set of pros and cons. Replacing a wheelchair tire is not complicated, and anyone with patience and know-how can do so. First the screwdriver method is tricky because you are only knocking one side of the bearing out at a time. Finally, you can also purchase the best wheelchair parts from an online retailer.
This involves ensuring that the tread is not worn and that there are no bald areas on the tire. with a hammer - and use as little force as you need). Most of these tires are smaller to quite a bit smaller than the rim they fit and need to be stretched so they can be installed. For Presta (French) valves, unscrew the top and press in. You must know how to check when your outdated wheels and tires are worn out to replace them promptly. Developing product quality standards for wheelchairs used in less-resourced environments. Place the new tire on the wheel hub to correctly align with the rim. So whether youre a first-time wheelchair user or just need a refresher on tire replacement, keep reading! However, some parts of wheelchairs will not last, and you will need to replace them periodically. If you dont replace wheelchair wheels when needed, these are the potential consequences: Wheelchairs are one of the most critical devices for people with limited mobility.
Wheelchair tires are an essential component of every wheelchair. Shes passionate about seeing the seniors in society live a more fulfilling life to the end. The chair may be unsafe to use and, in turn, decrease performance. In some instances, a chair user or caregiver can remove and install a new tire with relative ease. Financial support is derived from advertisements or referral programs, where indicated. With one half of the rim laying flat on your work surface, place the tire on top of one half of the rim and insert the valve through the hole (for inner tube) or make sure it lines up with the slot provided for the valve stem. Read her LATEST POSTS.
Spread the paste on the marks; scrub with a clean, nonabrasive cloth. In most cases, you can rub them off -- but because you may have to do it often, it's good to construct a tool that will help you. Free Domestic Shipping All Orders - International Click To See COVID Shipping Text, Free Domestic Shipping All Orders - International Click Here COVID Info, ** total_quantity ** | ** unit_price ** / ** unit_measure **, Socket Set (Metric or SAE depending on manufacturer), Snap Ring pliers to remove the snap ring between the two bearinsg, Bearing Press or large diameter dowel rod to install the new bearings. Once the air is out, press the sidewall of the tire all around to release the bead of the tire from the rim (tire beads can stick sometimes). Wheelchair wheels should be checked regularly for any damage and oiled to protect against the elements. For more information go to www.P65Warnings.ca.gov. Wheelchair tires are made up of two main components, the wheel and the tire, which are the determinants of quality wheelchairs. Make sure to insert the bearing spacer first if you have one. Slide the first side of the tire bead all the way around the rim until that side is completely on.
hbbd```b``Y See our homepage for informative news, reviews, sports, stories and how-tos. So you really need to tap lightly and move the screw driver frequently. These tires are filled with poly-foam, use an inner tube and require a two-piece wheel. Disabled World. Remove the caster wheel so that you can access the fork axle nut. You'll need a minimum of two lever bars for this step - one for holding your progress and the other for stretching the bead over the rim as you near the end. If using an inner tube, let the air out of the tire. Do not rub with coarse rags or abrasive pads, because these can scratch the floor finish. These water resistant wheelchair tire covers can also be used at swimming pools, saunas and spas. An eraser is also an easy way to remove tire marks if preferred.
Examine wheelchair tires regularly to guarantee that they are always in excellent operating condition.
Not impossible, just very hard. Place the top half of the rim onto the assembly and reattach the screws or bolts as before. 
Wheel Brush For A Wheelchair: Providing Hands-Off Cleaning! Bearings are removed and installed from the top only. Wheelchair socks and slippers cover both front and rear wheelchair wheels preventing dirt, marks, scuffs and scratches on floors and carpets. Also look at the tire liner if you have one and make sure it is still properly seated on the rim.
For Presta valves, unscrew the top and press in. Using pliers, remove the axle nut and washer by turning it counterclockwise. Installing solid urethane tires on manual wheelchair rim can only be accomplished with the right tools. All Rights Reserved. adjustable wrench, a flat head or phillips screwdriver. If you use a wheelchair indoors, non-marking wheelchair wheels will be best for you. Tire installation on a wheelchair or scooter is not very difficult if you have the right tools. Be careful to align the valve stem through the hole so it seats properly later when the tube is filled with air. Routinely inspect your wheelchair tires for damage or wear. For Schrader valves, press the stem in the middle of the valve. Scuff marks that mar the surface of a hardwood floor's finish, such as the rubber tire marks from a wheelchair, aren't difficult to remove.
Use the same procedure to remove the bottom bearing.
l)f$e`bd`FK "
If you have any questions, even if you are not using our tools or bearings, please feel fee to contact us. Once the tire is on the rim, push on the sides of the tire all the way around to make sure the tube isn't bunched up or pinched anywhere. These tires are essentially flat-free and require little to no maintenance as compared to pneumatic (air filled) rubber tires. This information is provided as a courtesy only. If you're not comfortable or cannot perform this task, ask around to your friends and family. Please share your tips below! customerservice@cewmail.com
Solution for Dirty Wheelchair Tires Leaving Marks on Floors and Carpets. Be careful to drop the assembly onto the deflated tire only. Some urethane tires are quite a bit smaller than the rim they are on so this can be difficult. You may or may not need lever bars for this step. Things to consider when choosing tires include manufacturer requirements, body weight, ease of installation, replacement availability, style and size. They can be put on while seated in the wheelchair or while outside of the wheelchair as can be shown in this video: Like Wheelchair Slippers, Wheelchair Socks have a special material inside the wheelchair tire cover to grip onto the tire and prevent slippage. Wheelchair / Scooter Tire Removal for One Piece Rim, Wheelchair / Scooter Tire Re-Installation for One Piece Rim, Wheelchair / Scooter Tire Re-Installation for Two Piece Rim, Wheelchair / Scooter Tire Installation Videos, Buying Guide for Wheelchair and Scooter Tires. Developing product quality standards for wheelchairs used in less-resourced environments [Internet]. If using an inner tube, inflate the tube slightly to give it a little shape and put the tube into the tire and push the valve through the hold in the rim. TiLite Lightspeed Forks are the forks we get the most questions about, so the pictures in this How To are of the TiLite Lightspeed Mono Fork. 
After the marks are gone, wash the floor thoroughly to remove any residue from the solvent. You can get the same results by rubbing the marks with the sole of a tennis shoe or a clean pencil eraser. Disabled World makes no warranties or representations in connection therewith. Let me explain how the fork is mounted to the wheelchair. Content may have been edited for style, clarity or length. This means your wheelchair wont go very far without repairs or replacement. You can very easily damage your fork beyond usable. 
If you are using metal lever bars, use extreme caution so you don't damage the rim. If using metal tire levers, use caution so as not to damage the rim. Remove the axle nut using a wrench or socket wrench. Then rinse with water and wipe dry. With the fork upright the bearing stack, from bottom up, is bottom bearing, then snap ring, then top bearing. 2009-2022 Enable Your Life, Inc. | EnableYourLife.com, All trademarks, logos, and images are owned by their respective owners, Installing Guide - Wheelchair / Scooter Tires, Wheelchair / Scooter Tire removal for one piece rim, Wheelchair / Scooter Tire re-installation for one piece rim, Wheelchair / Scooter Tire removal and re-installation for two piece rim, Wheelchair and Scooter Tire Installation Videos. This article is part our digest of 18 publications relating to Wheelchair Accessories that include: Outside dirt and germs can leave floors messy and dirty and wheelchair tires can damage expensive carpets and flooring. If the bearings came out during the removal process, you can pound them back in using a rubber mallet (only use a rubber mallet, or a block of wood wrapped in a towel. If tire marks are a regular problem for your wheelchair, consider using wheelchair tire covers. Are Bigger Wheels Better on a Wheelchair? You can also use longer bolts for two or three of the holes to draw the two halves together, allowing you to use the original hardware. 2017. The average lifespan of a wheelchair tire is somewhere between six and nine months. Whether on a road trip or just walking around your neighborhood, knowing how to change a manual wheelchair tire is essential. However, they still need maintenance. It would be best to consider purchasing wheelchair wheels made from a material resistant to UV rays for outdoor use. Disabled World is an independent disability community established in 2004 to provide disability news and information to people with disabilities, seniors, their family and/or carers. Is it Okay to Sleep in a Recliner?
If your wheelchair is used outdoors, it is crucial to keep an eye on the treads for wear and tear. For inner tubes, inflate to the pressure as recommended by the wheelchair or scooter manufacturer or the pressure listed on the side wall of the tire (for inner tube). Pros, Cons, & Side Effects. The wheel size is only one aspect that influences how well the wheel rolls over different types of terrain. Published: 2015-10-01 - Updated: 2021-07-26Author: RehaDesign | Contact: rehadesign.comPeer-Reviewed Publication: N/A, Synopsis: Solution for preventing wheelchair wheels and tires leaving dirty or muddy marks on floor coverings and carpets. 1. Remove the wheel from the wheelchair or scooter - never try to change a tire or tube with the wheel on the chair! The materials presented are never meant to substitute for professional medical care by a qualified practitioner, nor should they be construed as such.
Ease the second bead over the rim and using lever bars work the bead all the way around the rim until the bead is completely on.
